ACT6000
Copper Pair Testers
Net.Hunter
Ethernet Packet Capture
Ether.Giga
Ethernet Testers
KE401 IT Cable Tracer Kit
Cable/Line Tracer
KE2500 Telco Multimeter
Copper Pair Testers
Analogue Talk Set
Copper Talk Sets
KE3100 xDSL Detection Kit
Copper Pair Testers
xDSL Broadband Testers
KE3150 xDSL Detection Kit with VFL
Copper Pair Testers
xDSL Broadband Testers
OFI-3 Optical Fibre Identifier
Optical Fibre Identification
FIM-4 Fibre Microscope
Optical Inspection
TestPro CV100 Op
Fibre Optic Certification
Niva
GPON Analyser
eOLT
OLT Emulator
USB-Testbook
SIP/VoIP Trunk Tester
KE2100 TDR
Copper Pair Testers
KE80xx Fibre Optic Test Kits
Fibre Optic Test Kits
CCTS-03
Copper Talk Sets
ProfiShark 1G
Network Taps / Network Monitoring
KE8000 Optical Power Meter
Optical Power Meter
KE8100 MM Optical Light Source
Optical Light Source
KE8200 SM Optical Light Source
Optical Light Source
KE3550 xDSL Multitester
xDSL Broadband Testers
Copper Pair Testers
inSSIDer Office
WiFI Analysis
Spectrum Analysis
KE3700 xDSL Multitester
xDSL Broadband Testers
Copper Pair Testers
Net.Time
Synchronization Clocks
AT.2048
E1/G.703 Testers
Datacom Testers
Ether.Genius
Ethernet Testers
E1/G.703 Testers
Datacom Testers
Chanalyzer
Spectrum Analysis
xGenius
Ethernet Testers
E1/G.703 Testers
Datacom Testers
Wi-Spy Air
Spectrum Analysis
WiFI Analysis
WiFi Packet Capture
Zeus
Ethernet Testers
E1/G.703 Testers
Datacom Testers
NSA
Smart Building Testing
LAN Cable Qualification
LAN Validation
Eye P.A
WiFi Packet Capture
MGA2510
Ethernet Network Emulators
Ethernet Packet Capture
Ethernet Testers
Tamograph Pro
Site Survey
TestPro CV100 Cu
LAN Cable Qualification
TestPro CV100 LAN
LAN Validation
TestPro CV100 Smart
Smart Building Testing
KE905 Remote Unit
Copper Pair Testers
xDSL Broadband Testers
KE901 Loop Test Assistant
Copper Pair Testers
Optical Inspection
Optical Fibre Identification
Copper Pair Testers
xDSL Broadband Testers
Copper Pair Testers
xDSL Broadband Testers
Copper Talk Sets
Copper Pair Testers
Copper Pair Testers
xDSL Broadband Testers
Copper Pair Testers
xDSL Broadband Testers
Copper Pair Testers
Cable/Line Tracer
Cable/Line Tracer
Ethernet Testers
Ethernet Packet Capture
Cable/Line Tracer
Optical Power Meter
Optical Light Source
Copper Pair Testers
NSA
Smart Building Testing
LAN Cable Qualification
LAN Validation
Ethernet Testers
E1/G.703 Testers
Datacom Testers
Optical Light Source
Optical Light Source
Optical VFL
Optical Power Meter
Network Taps / Network Monitoring
Copper Talk Sets
Fibre Optic Test Kits
Zeus
Ethernet Testers
E1/G.703 Testers
Datacom Testers
Copper Pair Testers
LAN Validation
Ethernet Network Emulators
Ethernet Packet Capture
Ethernet Testers
SIP/VoIP Trunk Tester
eOLT
OLT Emulator
Niva
GPON Analyser
E1/G.703 Testers
Datacom Testers
Synchronization Clocks
xDSL Broadband Testers
Copper Pair Testers
Ethernet Testers
E1/G.703 Testers
Datacom Testers
Fibre Optic Certification
Smart Building Testing
LAN Validation
WiFI Analysis
Spectrum Analysis
LAN Cable Qualification
Site Survey
Spectrum Analysis
WiFI Analysis
WiFi Packet Capture
WiFi Packet Capture
Spectrum Analysis
L2 Button
Button Text

KE401 IT Cable Tracer Kit

Kurth KE401
KE401 IT Cable Tracer Kit
KE401 IT Cable Tracer Kit

Effective high performance cable tracing with Port Blink.

  • Six built-in tones
  • High power output
  • Tone tracing on active telephone lines
  • Cable tracking inside walls
  • Data Port test with HUB - Blink
  • Precise pair identifying
  • Signal strength LED with Noise Filter
  • Built-in torch light

Kurth KE401

EasyTest400 / Probe410 can be used with all types of cables such as power cables, telephone cables, bell wires, all classes of data cables, coax cable, wire harnesses in motor vehicles and many others. The EasyTest400 generates six different search signal frequencies, three continuous tones and three alternating tones. Users select different tones by pressing keys on the unit, status is displayed with LEDs.

Each search signal can be fed on to live telecommunications lines. The device is protected up to 120 volts AC. All connection cables are provided with an effective strain relief. The strong alligator clips are isolated while the individual RJ11 & RJ45 connectors have a strain relief. A special DATA test mode will cause the Port Lamp to Blink when connected to active network devices.

The battery compartment is separated from the electronics and equipped and secured with a captive screw. The signal receiver Probe410 detects the search signal without any contact to the wire under test up to a distance of 0.6 meter. This allows for the precise location of the cable path in thick bundles of cables, in walls or flush-mounted, and pair of wires in the distribution or in the bundle.

The Probe410 has a green signal LED with filter function, this LED will only light up when used with the 1 kHz signal of the EasyTest. This makes locating cables easy in noisy environments or in distribution boxes with interfering signals such as 50 Hz. The built-in white LED provides an illumination capability allowing users to find cables and identify wire colours in dark environments. The rugged, high-resistive test tip constructed out of non-conductive solid carbon fibre is easily replaceable.

The KE401 IT Cable & Line Tracer Kit comprises of an EasyTest400 tone generator and Probe410 inductive receiver packaged in a convenient carrying pouch. The kit allows technicians to find any kind of cable, wires and pairs without contact in the shortest possible time. The ET400 also indicates voltages on the cable, recognises the polarity and can be used as a continuity tester. The Probe 410 has a high-grade non conductive carbon fibre tip that may be easily replaced in the field for years of uninterrupted service.

FAQS

Q:
A:
Q:
A:
Q:
A:
Q:
A: