TestPro CV100 LAN
LAN Validation
TestPro CV100 Smart
Smart Building Testing
TestPro CV100 Op
Fibre Optic Certification
Niva
GPON Analyser
eOLT
OLT Emulator
USB-Testbook
SIP/VoIP Trunk Tester
MGA2510
Ethernet Network Emulators
Ethernet Packet Capture
Ethernet Testers
Zeus
Ethernet Testers
E1/G.703 Testers
Datacom Testers
CCTS-03
Copper Talk Sets
ProfiShark 1G
Network Taps / Network Monitoring
Chanalyzer
Spectrum Analysis
TestPro CV100 Cu
LAN Cable Qualification
inSSIDer Office
WiFI Analysis
Spectrum Analysis
xGenius
Ethernet Testers
E1/G.703 Testers
Datacom Testers
KE3700 xDSL Multitester
xDSL Broadband Testers
Net.Time
Synchronization Clocks
AT.2048
E1/G.703 Testers
Datacom Testers
Wi-Spy-Air
Spectrum Analysis
WiFI Analysis
WiFi Packet Capture
Eye P.A
WiFi Packet Capture
Tamograph Pro
Site Survey
Network Taps / Network Monitoring
Copper Talk Sets
Zeus
Ethernet Testers
E1/G.703 Testers
Datacom Testers
LAN Validation
Ethernet Network Emulators
Ethernet Packet Capture
Ethernet Testers
SIP/VoIP Trunk Tester
eOLT
OLT Emulator
Niva
GPON Analyser
E1/G.703 Testers
Datacom Testers
Synchronization Clocks
xDSL Broadband Testers
Ethernet Testers
E1/G.703 Testers
Datacom Testers
Fibre Optic Certification
Smart Building Testing
LAN Validation
WiFI Analysis
Spectrum Analysis
LAN Cable Qualification
Site Survey
Spectrum Analysis
WiFI Analysis
WiFi Packet Capture
WiFi Packet Capture
Spectrum Analysis
L2 Button
Button Text

Test Pro CV100 Smart Building Tester (K61)

Smart Building Infrastructure Tester

  • Certify twisted pair cable for CAT5e - CAT 8 Level IIG
  • Certify Singlemode and Multimode fibre optic cable
  • Validate actual PoE load in conformance with IEEE 802.3 af/at/bt/UPOE
  • Qualify Multi-gig link speed with easy pass/fail results through standards based Signal to Noise Ratio (SNR) measurements for 1/2.5/5/10Gig
  • Validate Wired and Wireless network connectivity

Key Capabilities

Twisted Pair Certification

The TestPro CV100 can certify operation of CAT5e through CAT8 structured cabling installations to all relevant standards and boasts the industry's fastest CAT6A auto test at just 6 seconds. On site time is optimised by providing fully featured units for both the Main and Remote testers and by enabling instant confirmation of continuity and mapping, initiation of autotests and access to full results from either end of the link. One main unit can talk to multiple Remote units to enable even faster testing with one technician.

Fibre Optic Testing

Test modules available for Multimode and Single Mode fibre Tier-1 certification with an auto-test time of just 4 seconds. Integration of Visual Fault Locator and DC voltage testing as well as an optional fibre end inspection accessory reduces the need to carry or use other products when troubleshooting even the most complex hybrid installations. Support for both single and dual ended loss measurement with instant length and propagation delay evaluation ensures test progress is quick and decisive.

Power over Ethernet Validation

Confirmation of actual loaded PoE characteristics according to 802.3 af/at/bt standards ensure visibility of actual power at any jack where a Powered Device (PD) will deploy. Full reporting of Power Source Equipment (PSE) configuration and powered pairs plus a unique external load test capability for isustained monitoring and identification of intermittent power issues make for comprehensive PoE testing.

Multi-Gigabit Qualification

Auto-test using integrated traffic generation and loopback stress tests cable links and rapidly qualifies Multi-Gigabit link speed for 1/2.5/5/10Gig data rates under PoE load. Per pair Signal to Noise Ratio (SNR) and Bit Error Rate (BER) reporting against default or user defined limits.

Network Connectivity Testing

To support and manage moves/adds/changes to live networks the TestPro CV100 will also connect through the platform's built-in 10/100/1000 network interface or through the optional WiFi interface. (No test adaptors needed) An auto-discovery function promptly displays connected devices or Wireless Access Points. Ping any other device on the local network or internet to confirm connectivity and determine latency. Drill in to discovered devices for more detailed support information

Results Management PC Software

TestDataPro is the PC based results and test reports management software package that comes as standard with all models of Testpro CV100. TestDataPro works in tandem with TestPro, which allows you to define projects and categorize test results into logical groupings once uploaded into the database. The database provides you with the ability to collaborate effectively by viewing in-depth test details on-line and rapidly provide .pdf based printed reports. It also allows you to combine multiple Autotests into a single report, such as Cat6A, Multi-Gig and PoE.

Network professionals responsible for maintaining and enhancing services within today's Smart Buildings need to be able to carry out both in-service testing of the network and out of service testing of their infrastructure to verify and document correct operation and performance as their systems evolve. A significant investment in test products is required to achieve this and the TestPro CV100 offers best in class flexibility and performance with a reduced cost of ownership. A range of optional detachable test modules enable a raft of test functions allowing the product to easily both match current and scale to future requirements.

FAQS

Q:
A:
Q:
A:
Q:
A:
Q:
A: